Description
41″ Wide. Sold by Lin. Ft.
When using a vacuum press, providing efficient air removal uniformly throughout the bag is a must. Usually this is done by the use of a platen board, normally a piece of 3/4″ particle board or MDF having 1/8″ grooves run in a grid pattern over its surface. Under certain circumstances a platen cannot be used and another means of air evacuation is needed.
The EvacuNet is made for this purpose. This material is a 1/8″ course weave plastic netting that gets the air efficiently down to the exit hole of the bag. EvacuNet comes 41 inches wide, can be cut to any length and can be used over and over. Just lay it over the project being pressed making sure the end is over the exit nipple.