 Standard
& Professional |
Hi-Flo
Industrial |
Air-Powered |
| Flip
Top |
Compact
100 |
Air
Form Bladders |
The VacuPress FlipTop™ is the latest development from Vacuum Pressing Systems meeting the demand for a top loading vacuum press. Designed primarily for pressing flat panels as well as low profile curved work, the FlipTop™ offers an "easy access" laminating system.
Place the work on the table,
close the lid and turn on the vacuum pump. The force of atmospheric pressure
automatically seals the gasket to the table and at the same time applies
pressure to the work.
When the pressing cycle is completed, open the release valve and lift
the lid. Simple and easy to use, the VacuPress FlipTop™
brings a new level of speed and convenience to vacuum veneering and laminating.
The VacuPress FlipTop™ comes as a complete kit, ready to assemble with complete instructions on frame assembly and how to make your own evacuation table for the frame.
Features:
- Construction from 1 1/4" anodized aluminum square tubing for
a light but strong frame assembled with welded corner brackets. Makes
frame assembly quick and easy.
- Tough 30 mil industrial grade clear urethane membrane with special
pleated "box construction" Allows for full size panel loading
up to 6" thick and up to 1O" on smaller work.
- Barbed insert strip locks membrane into the custom aluminum extrusion
for a solid connection against the pull of vacuum pressure
- Multi-ribbed neoprene gasket for airtight seal time after time.
- Ratchet lift-stays hold frame in the vertical position for convenient
loading and unloading.
- Comprehensive step by step instruction manual for easy assembly.
Sizes: (Sizes represent actual pressing capacity.)
- 49" x 97"
- 49" x 121"
- 61" x 97"
- 61" x 121"
"The Veneering and Clamping System for the Home Workshop"
Vacuum Pressing Systems, the
leader in vacuum technology for woodworking, is pleased to offer the VACU
PRESS(tm) Compact 100, an affordable, versatile system for veneering,
laminating and multipurpose clamping.
This model is specifically designed for the home workshop. The Compact
100 is the perfect choice for those who want to explore the exciting possiblities
of veneering and clamping with vacuum without the expense of larger systems
or the need for compressed air.
The heart of the system is an extremely quiet, cool running, continuous duty diaphragm vacuum pump, developing 1750 lbs of pressing force per square ft.
Compact 100 vacuum bags have heat welded seams and are made from a durable, flexible 20 or 30 mil vinyl.
From the C channel bag closure to the quick disconnects, cleanable filter jar and molded bag nipple, the Compact 100 delivers the same engineered quality and performance standards as our professional line. No detail has been overlooked.
The Compact 100 comes complete and ready to use. No additional equipment is required to operate the system. Since many woodworkers may be trying their hand at veneering for the first time, a comprehensive owner's manual is included to assist in successful pressing.
Specifications and Features
- 1 CFM single cylinder, continuous duty diaphragm vacuum pump cool and extremely quiet running, reaching maximum vacuum of 25HG (No compressor needed)
- Easy access, see- through filter jar with removable bowl for cleaning
- Vacuum gauge for monitoring the vacuum process
- 10 ft of braided vacuum hose with quick disconnects between the pump
and bag
- 25 ft of pressure sensitive neoprene vacuum tape to create a hold
down table for routing and sanding parts
- 20 or 30 mil clear vinyl vacuum bag with heat welded seams and clampless
molded entrance nipple
- Bag Sizes 49" x 49" (size represent actual pressing capacity)
- 2 part-C channel bag closure gives an airtight seal and a firm grip
against the pull of curved work.
- Patch kit for bag repair
- Comprehensive operator's manual Includes thorough instructions on
general veneering, pressing techniques and vacuum clamping.
"Vacuum Pressing Systems, the innovator in laminating technology, introduces the AirForm™ inflatable bladder system for internal support of 3-dimensional objects."
The force of vacuum can apply up to one ton per square foot. Until now any object other than a flat panel required substantial internal bracing to prevent damage or implosion. AirForm™ inflatable bladders redefine the way 3 dimensional objects can be pressed with vacuum, simplifying the process, eliminating time consuming and bulky forms and removing the fear of deflection or implosion.
For example, the 2x2 radius end panel in the picture (at left) would have
had over 8000 pounds applied to it at full vacuum. At only 25% vacuum,
however, severe sagging is already evident.
With AirForm(tm) inflatable bladders a 3 dimensional object like the one
shown can receive full vacuum pressure with absolutely no deflection,
as shown below:
The principle is simple. Instead of a rugged form to support the shaped
object, an air filled bladder is used, expanding to equal the vacuum pressure
being applied. The AirForm™ is completely self adjusting, perfectly
balancing the opposing pressures.
AirForm™ inflatable bladders can be connected together to fill large
spaces or cabinets with separate compartments.
- Rugged 15 mil clear polyurethane construction with warranteed seams.
- Includes all fittings & hoses for connection through existing vacuum bag.
- Can be inflated or deflated from outside the vacuum bag.
Available in 5 bladder sizes:
- 2' x 5'
- 2' x 9'
- 3' x 7'
- 3' x 10'
- 4' 6" x 10'
Accessories -- What's New -- Company Profile -- Catalog -- Order Products